PRODUCTS

RV Antifreeze

 

Protect your RV, Boat or Cabin!

  1. Drain water supply system (fresh water, hot water and grey water holding tanks) following manufacturer instructions.  Turn off pump.  Reclose drain valves.
  2. Bypass hot water heater by directly connecting input and output water supply pipes, or use water heater bypass valves if installed.
  3. Remove water purifier filter cartridge and replace empty canister.  Add at least 2 gallons of 20/10 Anti-Freeze to fresh water supply tank.  DO NOT DILUTE.
  4. Re-pressurize water supply system with pump on.  Flush toilet until pink liquid fills bowl.
  5. Open hot and cold water faucets one at a time and let flow until pink liquid fills system.

CAUTION:  HOT WATER HEATERS CAN FREEZE.

Hot water heaters also need 20/10 RV Anti-Freeze.
To best protect you heater, we suggest you buy a hot water bypass kit.

WINTERIZING HOT WATER HEATERS WITH Hot water heater bypass kit:

  1. Reverse bypass procedure (Step #2) and run pump for several minutes.

WITHOUT bypass kit

  1. Depressurize system by turning pump off and opening any hot water faucets.
  2. Reconnect hot water inlet and outlet pipes to water heater (Step #2).  Close hot water faucet.
  3. Turn pump on to run 20/10 RV Anti-Freeze into hot water heater tank.  Allow liquid to run several   minutes or until it no longer flows.  Turn off pump.
  4. Open hot water heater tank drain to check for pink liquid in system.  Close immediately.  Your system is now winterized.

The safe way to WINTERIZE your RV, boat, cabin, swimming pool or hot tub!

No more expensive repair of frozen waterlines, pumps and purifiers!  Protect your fresh water supply system during cold weather with 20/10 RV Anti-Freeze.  Especially designed for RV’s, boats and cabins, it is odorless, tasteless, and contains no alcohol.

  • Prevents fresh water pipe systems from bursting to -50o F.
  • Protects systems that stay formant in winter.
  • Safe for plastic, copper or steel plumbing.
  • Bright pink dye warns of any remaining RV Anti-Freeze following the system flushing.
  • Provides corrosion protection.
  • Slush/semi-solid formation normal below 0F.